Rode Nt1 Microphone Review for Hip Hop Vocals

AT4040 vs AKG C214 vs Rode NT1 (rap/hip-hop vocals)

---

For rap/hip-hop vocals

I currently take an AT2020 and take been using this for a few years now and recollect information technology'south fourth dimension for an upgrade. I've been doing some research and have gotten stuck between the AT4040, AKG C214 and the Rode NT1. I mainly record rap/hip-hop vocals. I know the answer might differ on the style of my voice, so I'll provide a link to one of my recordings so maybe information technology'll provide a improve idea of my sound. If you guys could give me some advice and management, I would really appreciate information technology. Thanks in advance guys!

Voice reference: https://soundcloud.com/anthonyraps/q...nthony-navarro

At that place is nothing awful nearly your phonation that you need to disguise, so y'all don't demand anything play a trick on. All iii of these mics look similar honest, adept quality mics that would probably sound like in a shootout.
If y'all have any stiff gut feeling about which one you should get with, y'all can't make a large mistake if yous merely go with that.

If it were my coin, I'd save some past going with the black NT-1. At Sweetwater today it costs less than the others and comes with a shockmount and popular filter.
My next pick would be the A-T. The brand always delivers more than yous pay.
My third choice is AKG. I have a picayune suspicion when a famous maker comes out with a cheaper mic that looks way too much like their famous mic. I oasis't used the 214, merely that's MY gut feeling.

Lives for gear

I had the NT-1a and have the AT4040 now. These these are great mics but I would as well strongly recommend the Miktek MK-300. This is a very articulate clear mic that has a nice weight and punch to its sound.
I would try and find a dealer that allows you to demo all these mics in your studio and go along the i that's working best for you lot

Quote:

Originally Posted past dickiefunk ➡️

detect a dealer that allows you to demo all these mics in your studio and proceed the i that'southward working best for you lot

That's definitely the best way to become, IF you can get someone on the sales end to trust you and work with you. Information technology doesn't hurt to enquire.

Lives for gear

Really good advice then far. Of those lower-priced mics, I always recommend the Audio-Technica 40xx series because, kind of similar Bushman said, they're a lot of mic for the money. They're very well-congenital, high-quality pieces of equipment that y'all tin can go along for a very long fourth dimension, and they work on a ton of sources.

I've never tried the Rode NT1 or the Miktek MK300 but I've heard expert things nigh both. Miktek seems to make really good affordable gear.

Around the same cost, and specifically if you want a song mic for a hip-hop vibe, you should check out the 3U Sound Warbler MKVI. 3U makes insanely good mics for the money.

Gear Guru

Excellent suggestions all round. IMHO though the Rode NT1 (black) with its Kit.... Would suit your vox the best, to minimize sibliance.
Haven't tried the 3U Sound line still, but they take an impressive reputation.
Chris

Quote:

Originally Posted by anthonyraps ➡️

For rap/hip-hop vocals

I currently have an AT2020 and take been using this for a few years now and think it's time for an upgrade. I've been doing some research and take gotten stuck between the AT4040, AKG C214 and the Rode NT1. I mainly tape rap/hip-hop vocals. I know the answer might differ on the style of my phonation, and so I'll provide a link to one of my recordings then maybe information technology'll provide a better idea of my sound. If you guys could give me some communication and management, I would really capeesh it. Thank you in advance guys!

Voice reference: https://soundcloud.com/anthonyraps/q...nthony-navarro

All of the above are great suggestions and you'd probable be happy with any of them. I listened to your song and your voice is just fine merely sounds candy with a type of distortion that I don't necessarily capeesh, I think it takes away from your voice but hey that is your option and mayhap that is what your going for in this genre.

The AT2020 is ok but a lilliputian defective (very lean mid bass from my recollection). I have the NT-1, 4040, and MK-300. All are good mics in my stance. I take a preference for the Miktek as it has both warmth and dainty detail, it is besides very well built. Information technology is more than flexible since it is a multipattern mic. I call back my sound preference is in part that it has a transformer output while the other two are transformerless.
The NT-1 has a x twelvemonth warranty is well regarded, pretty neutral sounding and comes with an excellent shock mountain and pop filter. It is a good bargain.
The AT mic is very prissy and congenital in Japan. It has been reliable and performs well just I take found information technology doesn't fit some voices as well as the other ii mics since it has a footling more characterful frequency response.

I'd recommend confronting the AKG - I take a 414 and a friend has the 214. The 214 is a little besides brittle sounding to my ears - 414 is much improve and a more flexible mic in full general just also a college toll indicate.

Hope that helps!

Skilful luck!

Gear Guru

Quote:

Originally Posted by chessparov2.0 ➡️

Fantabulous suggestions all circular. IMHO though the Rode NT1 (black) with its Kit.... Would suit your vox the best, to minimize sibliance.
Haven't tried the 3U Audio line nevertheless, merely they have an impressive reputation.
Chris

The ane and only black NT1 I ever tried was sibilant af.

Quote:

Originally Posted by Karloff70 ➡️

The i and only black NT1 I always tried was sibilant af.

Information technology is strange because information technology isn't an overly brilliant mic like the NT-1A. I accept experienced that with some voices on the NT-i also, only by no means all voices. It is very dependent on the specific frequency range where your ssss is formed so I can certainly understand why Chris fabricated the suggestion.

Cheers!

Gear Guru

FWIW mine is exactly at half dozen.5 KHz. Fortunately, information technology has lessened over the years. Or am I simply singing less songs with esses in them? Hmm...
Chris

The black NT-one has a rising between 4K and 10k. It is only a couple of db, which is less than the NT-1a and somewhat typical amid even the most expensive LDC mics. LDC vocal mics are non flat measurement mics.

Lives for gear

I accept compared the NT1 Black to the AT-4040 and MK-300. I prefer both over the Rode. I found the NT1 Blackness to sound a little harsh.
The AT-4040 is a corking workhorse that works well on a lot of sources. I've only used the Miktek on vocals then far but information technology has a actually flattering audio that works well on some singers. I don't personally record rap but I would expect both to work well for this. I would expect the MK-300 to suit this better merely without personally trying them on your phonation I wouldn't want to say for definite.

anthonynoppy1956.blogspot.com

Source: https://gearspace.com/board/so-much-gear-so-little-time/1315592-at4040-vs-rode-nt1-rap-hip-hop-vocals.html

Share this post